With MyLivoltek app, you can adjust the grid parameters including maximum and minimum voltage of your Livoltek inverter. Here are the complete steps;
- Turn on your phone’s bluetooth and location.
- Open MyLivoltek app.
- If you have not created an account a column showing “Go to Local Mode” will appear, tap on it.
- If you have created an account and configured your inverter, tap “Me” from the bottom right corner.
- Now, tap “Go to Local Mode”.
- Tap on “Bluetooth” and then tap “inverter”.
- Select the previewed inverter number, the system parameters will be shown here.
- To adjust the grid parameters of Livoltek on-grid system go to settings.
- Tap advanced settings and add password hx123456.
- Tap confirm.
- You can now see the grid parameters.
- Toggle on the “10 Min Overvoltage Protection Limit”.
- Note that you must only change the over voltage and minimum voltage of your system. Do not change any other settings.
- Select overvoltage (no more than 270) and minimum voltage (no less than 180) range.
- Tap confirm.
- Go back, and refresh to check the adjusted settings.
Here is the complete video instructions to change the grid parameters including maximum and minimum voltage of your Livoltek inverter.
Also Read: How to Turn Off Ground Detection for the Livoltek Hybrid Inverter? MyLivoltek App
